<

fieldcommunicator

Schneider ATV71HD37N4 Altivar 71 Variable Frequency Drives V

description:Schneider ATV71HD37N4 Altivar 71 Variable Frequency Drives VFD ATV71HD37N4 Variable Speed Drives...
BASIC INFO
Schneider ATV71HD37N4 Altivar 71 Variable Frequency Drives VFD ATV71HD37N4 Variable Speed Drives



 



ATV71HD37N4Z is a kW, drive from the Altivar 71 range and is manufactured for constant torque applications using three-phase motors. Northern Industrial are specialists in supporting users of Telemecanique variable speed drives, including the ATV71HD37N4Z, and provide fast and reliable spares and repairs.


Main of Schneider ATV71HD37N4 Altivar 71 Variable Frequency Drives VFD ATV71HD37N4 Variable Speed Drives
range of product
Altivar 71
 
product or component type
Variable speed drive
 
product specific application
Complex, high-power machines
 
component name
ATV71
 
motor power kW
37 kWat 380...480 V 3 phases
 
motor power hp
50 hpat 380...480 V 3 phases
 
motor cable length
<= 328.08 ft (100 m) Shielded cable
<= 656.17 ft (200 m) Unshielded cable
 
power supply voltage
380...480 V (- 15...10 %)
 
Phase
3 phases
 
line current
69 Afor 480 V 3 phases 37 kW / 50 hp
84 Afor 380 V 3 phases 37 kW / 50 hp
 
EMC filter
Integrated
 
assembly style
With heat sink
 
apparent power
55.3 kVAat 380 V 3 phases 37 kW / 50 hp
 
prospective line Isc
<= 22 kA, 3 phases
 
nominal output current
65 Aat 2.5 kHz 460 V 3 phases 37 kW / 50 hp
79 Aat 2.5 kHz 380 V 3 phases 37 kW / 50 hp
 
maximum transient current
130 Afor 2 s 3 phases 37 kW / 50 hp
118.5 Afor 60 s 3 phases 37 kW / 50 hp
 
output frequency
0.1...599 Hz
 
nominal switching frequency
2.5 kHz
 
switching frequency
1...16 kHz adjustable
2.5...16 kHz with derating factor
 
asynchronous motor control profile
ENA (Energy adaptation) system for unbalanced loads
Flux vector control (FVC) with sensor (current vector)
Sensorless flux vector control (SFVC) (voltage or current vector)
Voltage/frequency ratio (2 or 5 points)
 
type of polarization
No impedance Modbus
 

Complementary of Schneider ATV71HD37N4 Altivar 71 Variable Frequency Drives VFD ATV71HD37N4 Variable Speed Drives
product destination
Asynchronous motors
Synchronous motors
 
power supply voltage limits
323...528 V
 
power supply frequency
50...60 Hz (- 5...5 %)
 
power supply frequency limits
47.5...63 Hz
 
speed range
1...100 asynchronous motor in open-loop mode, without speed feedback
1...50 synchronous motor in open-loop mode, without speed feedback
1...1000 asynchronous motor in closed-loop mode with encoder feedback
 
speed accuracy
+/- 0.01 % of nominal speed 0.2 Tn to Tn torque variation in closed-loop mode with encoder feedback
+/- 10 % of nominal slip 0.2 Tn to Tn torque variation without speed feedback
 
torque accuracy
+/- 15 % in open-loop mode, without speed feedback
+/- 5 % in closed-loop mode with encoder feedback
 
transient overtorque
220 % of nominal motor torque +/- 10 %for 2 s
170 % of nominal motor torque +/- 10 %for 60 s every 10 minutes
 
braking torque
<= 150 % with braking or hoist resistor
30 % without braking resistor
 
synchronous motor control profile
Vector control without speed feedback
 
regulation loop
Adjustable PI regulator
 
motor slip compensation
Adjustable
Automatic whatever the load
Not available in voltage/frequency ratio (2 or 5 points)
Suppressable
 
diagnostic
1 LED red presence of drive voltage
 
output voltage
<= power supply voltage
 
insulation
Electrical between power and control
 
type of cable for mounting in an enclosure
With a NEMA Type1 kit: 3-strand UL 508 cableat 104 °F (40 °C), copper 75 °C PVC
With an IP21 or an IP31 kit: 3-strand IEC cableat 104 °F (40 °C), copper 70 °C PVC
Without mounting kit: 1-strand IEC cableat 113 °F (45 °C), copper 70 °C PVC
Without mounting kit: 1-strand IEC cableat 113 °F (45 °C), copper 90 °C XLPE/EPR
 
electrical connection
AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR terminal 2.5 mm² / AWG 14
L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB terminal 50 mm² / AWG 1/0
 
tightening torque
L1/R, L2/S, L3/T, U/T1, V/T2, W/T3, PC/-, PO, PA/+, PA, PB 106.19 lbf.in (12 N.m) / 102.2 lb.in
AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR 5.31 lbf.in (0.6 N.m)
 
supply
Internal supply for reference potentiometer (1 to 10 kOhm), 10.5 V DC +/- 5 %, <= 10 mAfor overload and short-circuit protection
Internal supply, 24 V DC, voltage limits 21...27 V, <= 200 mAfor overload and short-circuit protection
 
analogue input number
2
 
analogue input type
AI1-/Al1+ bipolar differential voltage +/- 10 V DC, input voltage 24 V max, resolution 11 bits + sign
AI2 software-configurable current 0...20 mA, impedance 242 Ohm, resolution 11 bits
AI2 software-configurable voltage 0...10 V DC, input voltage 24 V max, impedance 30000 Ohm, resolution 11 bits
 
input sampling time
AI1-/Al1+ 2 ms, +/- 0.5 ms analog input(s)
Al2 2 ms, +/- 0.5 ms analog input(s)
LI1...LI5 2 ms, +/- 0.5 ms discrete input(s)
LI6 (if configured as logic input) 2 ms, +/- 0.5 ms discrete input(s)
 
response time
<= 100 ms in STO (Safe Torque Off)
AO1 2 ms, tolerance +/- 0.5 ms analog output(s)
R1A, R1B, R1C 7 ms, tolerance +/- 0.5 ms discrete output(s)
R2A, R2B 7 ms, tolerance +/- 0.5 ms discrete output(s)
 
absolute accuracy precision
AI1-/Al1+ +/- 0.6 % for a temperature variation 60 °C
AI2 +/- 0.6 % for a temperature variation 60 °C
AO1 +/- 1 % for a temperature variation 60 °C
 
linearity error
AI1-/Al1+, AI2 +/- 0.15 % of maximum value
AO1 +/- 0.2 %
 
analogue output number
1
 
analogue output type
AO1 software-configurable current 0...20 mA, impedance 500 Ohm, resolution 10 bits
AO1 software-configurable logic output 10 V <= 20 mA
AO1 software-configurable voltage 0...10 V DC, impedance 470 Ohm, resolution 10 bits
 
discrete output number
2
 
discrete output type
R1A, R1B, R1C configurable relay logic NO/NC, electrical durability 100000 cycles
R2A, R2B configurable relay logic NO, electrical durability 100000 cycles
 
minimum switching current
Configurable relay logic 3 mAat 24 V DC
 
maximum switching current
R1, R2 on resistive load, 5 Aat 250 V AC, cos phi = 1,
R1, R2 on resistive load, 5 Aat 30 V DC, cos phi = 1,
R1, R2 on inductive load, 2 Aat 250 V AC, cos phi = 0.4,
R1, R2 on inductive load, 2 Aat 30 V DC, cos phi = 0.4,
 
discrete input number
7
 
discrete input type
LI6: switch-configurable 24 V DC with level 1 PLC, impedance: 3500 Ohm
PWR: safety input 24 V DC, impedance: 1500 Ohm conforming to ISO 13849-1 level d
LI1...LI5: programmable 24 V DC with level 1 PLC, impedance: 3500 Ohm
LI6: switch-configurable PTC probe 0...6, impedance: 1500 Ohm
 
discrete input logic
LI1...LI5 positive logic (source), < 5 V (state 0), > 11 V (state 0)
LI1...LI5 negative logic (sink), > 16 V (state 0), < 10 V (state 0)
LI6 (if configured as logic input) positive logic (source), < 5 V (state 0), > 11 V (state 0)
LI6 (if configured as logic input) negative logic (sink), > 16 V (state 0), < 10 V (state 0)
 
acceleration and deceleration ramps
Automatic adaptation of ramp if braking capacity exceeded, by using resistor
Linear adjustable separately from 0.01 to 9000 s
S, U or customized
 
braking to standstill
By DC injection
 
insulation resistance
> 1 mOhm at 500 V DC for 1 minute to earth
 
frequency resolution
Analog input 0.024/50 Hz
Display unit 0.1 Hz
 
communication port protocol
CANopen
Modbus
 
connector type
1 RJ45 Modbus on front face
1 RJ45 Modbus on terminal
Male SUB-D 9 on RJ45 CANopen
 
physical interface
2-wire RS 485 Modbus
 
transmission frame
RTU Modbus
 
data format
8 bits, 1 stop, even parity Modbus on front face
8 bits, odd even or no configurable parity Modbus on terminal
 
number of addresses
1...247 Modbus
1...127 CANopen
 
method of access
Slave CANopen
 
marking
CE
 
operating position
Vertical +/- 10 degree
 
height
21.65 in (550 mm)
 
depth
10.47 in (266 mm)
 
width
9.45 in (240 mm)
 
product weight
81.57 lb(US) (37 kg)
 
functionality
Full
 
specific application
Other applications
 
Schneider ATV71HD37N4 Altivar 71 Variable Frequency Drives VFD ATV71HD37N4 Variable Speed Drives

ATV71H075N4Z ATV71H075N4 ATV71HU15N4Z ATV71HU15N4
ATV71HU22N4Z ATV71HU22N4 ATV71HU30N4Z ATV71HU30N4
ATV71HU40N4Z ATV71HU40N4 ATV71HU55N4Z ATV71HU55N4
ATV71HU75N4Z ATV71HU75N4 ATV71HD11N4Z ATV71HD11N4
ATV71HD15N4Z ATV71HD15N4 ATV71HD18N4Z ATV71HD18N4
ATV71HD22N4Z ATV71HD22N4 ATV71HD30N4Z ATV71HD30N4
ATV71HD37N4Z ATV71HD37N4 ATV71HD45N4Z ATV71HD45N4
ATV71HD55N4Z ATV71HD55N4 ATV71HD75N4Z ATV71HD75N4
ATV71HD90N4 ATV71HC11N4 ATV71HC13N4 ATV71HC16N4
ATV71HC20N4 ATV71HC25N4 ATV71HC28N4 ATV71HC31N4
ATV71HC40N4 ATV71HC50N4 ATV71HC20N4 ATV71HC25N4
ATV71HD75N4 ATV71HU30M3 ATV71HU15N4S337 ATV71HD30M3X 
ATV71HU22M3S337 ATV71HU30M3Z ATV71HU22N4S337 ATV71HD37M3X 
ATV71HU30M3S337 ATV71HU40M3 ATV71HU30N4S337 ATV71HD45M3X 
ATV71HU40M3S337 ATV71HU40M3Z ATV71HU40N4S337 ATV71HD55M3X 
ATV71HU55M3S337 ATV71HU55M3 ATV71HU55N4S337 ATV71HD55M3XD 
ATV71HU75M3S337 ATV71HU55M3Z ATV71HU75N4S337 ATV71HD75M3X 
ATV71HD11M3X337 ATV71HU75M3 ATV71HD11N4S337 ATV71HD75M3XD 
ATV71HD15M3X337 ATV71HU75M3Z ATV71HD15N4S337 ATV71H075N4S337 
ATV71HD18M3X337 ATV71HD11M3X ATV71HD18N4S337 ATV71HD75M3X337 
ATV71HD22M3X337 ATV71HD11M3XZ ATV71HD22N4S337 ATV71W075N4 
ATV71HD30M3X337 ATV71HD15M3X ATV71HD30N4S337 ATV71WU15N4 
ATV71HD37M3X337 ATV71HD15M3XZ ATV71HD37N4S337 ATV71WU22N4 
ATV71HD45M3X337 ATV71HD18M3X ATV71HD45N4S337 ATV71WU30N4 
ATV71HD55M3X337 ATV71HD22M3X ATV71HD55N4S337 ATV71WU40N4 
ATV71H075M3S337 ATV71HU15M3S337 ATV71HD75N4S337 ATV71WU55N4


Schneider ATV71HD37N4 Altivar 71 Variable Frequency Drives VFD ATV71HD37N4 Variable Speed Drives

ATV71HD37N4 ATV71HD37N4S337 ATV71HD37N4T1 ATV71HD37M3X ATV71HD37Y
ATV71HD11M3X ATV71HD11N4 ATV71HD11N4Z ATV71HD11Y ATV71HD15M3X
ATV71HD15N4 ATV71HD15N4T1 ATV71HD15N4Z ATV71HD15Y ATV71HD18M3X
ATV71HD18N4 ATV71HD18N4Z ATV71HD18Y ATV71HD22M3X ATV71HD22N4
 



Altivar 71 LHP:  Schneider ATV71HD37N4 Altivar 71 Variable Frequency Drives VFD ATV71HD37N4 Variable Speed Drives
  • ATV71H075N4
  • ATV71H075N4Z
  • ATV71HU15N4
  • ATV71HU15N4Z
  • ATV71HU22N4
  • ATV71HU22N4Z
  • ATV71HU30N4
  • ATV71HU30N4Z
  • ATV71HU40N4
  • ATV71HU40N4Z
  • ATV71HU55N4
  • ATV71HU55N4Z
  • ATV71HU75N4
  • ATV71HU75N4Z
  • ATV71HD11N4
  • ATV71HD11N4Z
  • ATV71HD15N4
  • ATV71HD15N4Z
  • ATV71HD18N4
  • ATV71HD18N4Z

Altivar 71 MHP:  Schneider ATV71HD37N4 Altivar 71 Variable Frequency Drives VFD ATV71HD37N4 Variable Speed Drives
  • ATV71HD22N4
  • ATV71HD22N4Z
  • ATV71HD30N4
  • ATV71HD30N4Z
  • ATV71HD37N4
  • ATV71HD37N4Z
  • ATV71HD45N4
  • ATV71HD55N4
  • ATV71HD75N4
  • ATV71HD75N4Z

Altivar 71 HHP:   Schneider ATV71HD37N4 Altivar 71 Variable Frequency Drives VFD ATV71HD37N4 Variable Speed Drives
  • ATV71HD90N4
  • ATV71HC11N4
  • ATV71HC13N4
  • ATV71HC16N4
  • ATV71HC20N4
  • ATV71HC25N4
  • ATV71HC28N4
  • ATV71HC31N4
  • ATV71HC40N4
  • ATV71HC50N4


 

We are specialized in intelligent instruments, including : control system, transmitters, flow meters,sensors, recorders, analyzers, control valves, controllers, PLC's, etc.
 
We mainly supply Yokogawa ,Honeywell,Siemens,ABB,FLUKE,Endress+Hauser,Schneider Electric,Moeller,FUJI,Omron,Pepperl+Fuchs,Hima,Yaskawa, Norgren, Hach, Weidmuller ,Phoenix,MTL,Testo etc.
 
Why choose us?
 
1. 100% original product, 100% quality assurance.
If you find a fake. Please contact us without hesitation! We afford the shipment cost! We send you a new product asking zero cent!
 
2. Varied payment methods.
We adopt T/T, western union and paypal. If you can not trust us , you can choose to pay it via Aliexpress! 100% make your money safe!
 
3.SHIPPING:
We can shipping all over the world.via DHL,UPS,Fedex,TNT and EMS etc., the packaging is very safe and strong. if you have any special needs,please notify me.
It will take 3 to 7days to reach in your hands.
 
Packaging: 
Imported with original packaging or standard export packing.Customize design is acceptable.
 
Contact:
 
HONGKONG XIEYUAN TECH CO., LIMITED
Email:becky@hkxytech.com   Web:www.hkxytech.com
Mobile:+86-15972186287(Whatsapp & Wechat)

 
Previous:Schneider ATS22C59Q Soft Starter AST22 Altistart 22 Softstar Next:Schneider TSXAEY1614 Modicon Premium PAC TSXAEY1614 Analog I
 Footer begin -->